傳感器信號放大器是將傳感器輸出信號進行精密放大，線路內部進行穩壓、恒流供橋、電壓電流轉換，阻抗適配，線性補償，溫度補償?shù)?，將力學量轉換成標準電流、電壓信號輸出

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：143

產品咨詢 13352927502

詳細介紹在線留言

傳感器信號放大器是將傳感器輸出信號進行精密放大，線路內部進行穩壓、恒流供橋、電壓電流轉換，阻抗適配，線性補償，溫度補償?shù)?，將力學量轉換成標準電流、電壓信號輸出。

美國Transducer Techniques TMO-2A集成放大器和信號調理儀功能，用于信號源和讀出設備之間的信號調理器件，如衰減器、前置放大器、電荷放大器以及對傳感器或放大器進行非線性補償?shù)碾娖睫D(zhuǎn)換器件。

Transducer TMO-2A傳感器模塊是一款差分放大器/信號調節器，價格好，性價比高。并提供激勵，結算和滿刻度校準功能。

The TMO-2A Transducer Modules is a complete differential amplifier/signal conditioners with self contained power. The unit provide excitation, balance and span adjustment via precision 10 turn pots, and shunt calibration necessary to couple a user supplied bridge type transducer to an indicating instrument. Zero to full scale output is specified at 4-20 mA. The TMO-2A provides a floating shunt calibration circuit which applies calibration at the transducer, thereby eliminating errors due to line losses. The excitation supply incorporates a Wagner Ground to greatly improve Common Mode Rejection. The factory set bandwidth of the module is narrow to improve stability. The removal of a single capacitor will increase the frequency response DC to 60K Hz for dynamic data applications.

詳情請聯系我們

SIGNAL CONDITIONER

Type: Full external bridge

Sensor Resistance: 120 to 1000 ohm

Balance Range (350 OHM): 3% of bridge resistance

Shunt Calibration: Single point momentary

Calibration Value: 1 mV/V resistor provided

BRIDGE AMPLIFIER

Type: Bipolar differential

Gain Range: 67 to 737

Input Sensitivity: 1 mV/V to 10 mV/V

Input Impedance: 10 Megohm minimum