歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
The HS-670 series of Digital Amplifier is designed to combine reliable weight information from process vessels with extremely easy operation and setup.
A wide range of strain gauge load cells can be connected and output is provided in the common 4… 20 mA signal format. Direct access to all configuration and operation levels via the front keys.
1. Cost-effective, a variety of digital filtering.
2. Communication mode RS232 or RS485, and can add analog output.
3. Calibrate and modify parameters through handheld terminal.
4. Good stability, strong anti-interference.
Specifications | Technique |
Power supply | DC10~30V |
Signal input range | 0.4~6mV/V |
Excitation voltage | 5VDC±2%，100mA |
A/D conversion resolution | 24bit (binary) （24位） |
Interface | RS232 or RS485 two options, and can add analog output (0~20mA/4~20mA/-10~10V)(RS232或RS485二選一，并可添加 模擬量輸出) |
Protocol | Modbus RTU/FREE（自由協議） |
Transmission speed | 1200/2400/4800/9600/19200/38400/57600/115200 |
Number of load cells | Up to 6 load cells 350 Ω（6個350歐傳感器） |
Dimensions | 82x76x24mm |
Temperature operating | -30~60℃ |
A/D conversion rate | 10/40/640/1280/S |
Minimum indication resolution | 1/10000 |
Protection | IP64 |
Selection Table
HS-670-C1 RS232
HS-670-C2 RS485
HS-670-C1A1 RS232+模擬量輸出
HS-670-C2A1 RS485+模擬量輸出
HS-670
相關文章
當前位置：
上一個：
返回列表
產品分類