轉速計，又名轉速表、轉速儀，是機械行業的儀器之一，用來測定電機的轉速、線速度或頻率

產品型號：

更新時間：2024-08-20

廠商性質：代理商

訪問量：248

產品咨詢 13352927502

詳細介紹在線留言

轉速計，又名轉速表、轉速儀，是機械行業的儀器之一，用來測定電機的轉速、線速度或頻率。常用于電機、電扇、造紙、塑料、化纖、紡織、汽車、飛機、輪船等制造業。大多常用的為手持離心式轉速計。美國Checkline旗下的轉速計一般為數字式，有接觸式和非接觸式兩種測量。非接觸式采用光電器件測量，無連接軸，對被測件無任何影響，提高測量精度。

例如Checkline CDT-2000HD型轉速計，兼有接觸式與非接觸式兩種測量方式，精準測量轉速，表速和長度?？蛇x用Checkline CDT-1000HD型。

CDT-2000HD運用：

The CHECK?LINE® CDT-2000HD Combination Hand-Held Digital Tachometer combines the best features of both contact and noncontact models to accurately measure RPM, surface speed and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The CDT-2000HD can be up to 24 inches away from the small piece of reflective tape that is affixed to the rotating element. In the contact operating mode, the speed is sensed by directly contacting the rotating device using the cone tip or surface speed wheel supplied with the instrument. The CDT-2000HD's rugged construction, portability and outstanding features make it an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.

CHECK-LINE便攜式手持?jǐn)?shù)字轉速表CDT-2000HD，廣泛運用于不同機械和材料處理應用程序。集成接觸式和非接觸式兩種模式，測量更加精準，可測轉速，線速度和長度。在非接觸模式下，通過可見光束測轉速?？梢栽诰嚯x測量件小片放光帶24英寸的情況下測量。在接觸式模式下，運用自帶配件錐頭和表速輪接觸旋轉裝置來感應速度。CDT-2000HD機身結實、使用便攜和，是維修人員，機械操作員和用戶的理想之選。

測速范圍1-99999 RPM 轉數/分

精度為0.02%，分辨率達0.01 rpm

存儲卡，可存儲，最小，平均和值

可在離被測件距離為24英寸的情況下測量

可免費提供由美國國家標準與技術研究院（NIST）的認證書

塑橡膠殼機身，免受惡劣自然環境影響

標配周長為6英寸的表速輪，還可以選配周長12英寸或者10厘米的

如果只需要非接觸式轉速計，可選CDT-1000HD

量程

接觸式：1.00 - 19,999 rpm

非接觸式：1.00 - 99,999 rpm

分辨率	0.01 from 0 –100
	0.1 from 100 – 1,000
	1 from 1000 – 99,999
精度	± 0.02% of reading or ±1 digit
顯示	5-Digit LCD, 10mm high
小數點	Automatic
內存	Maximum, minimum, average and last reading (retained in memory for the life of batteries)
測量系統
非接觸式	Visible LED light beam
接觸式	Contact adapter
應用單位
轉速	RPM
表速	Feet/min, inches/min and meters/min
長度	Feet, inches, meters
感應距離	Up to 24 inches (60 cm)
顯示更新率	0.5 seconds or one measuring period
自動關機功能	After 30 seconds of non-use (minimum, maximum average, and last reading retained in memory)
電池續航	40 hours continuous use (approx.) with alkaline batteries
電池類型	2 AA (1.5 V) or rechargeable
重量	6 ounces (170 grams)
外殼材質	ABS Plastic
運行溫度	32 to 122° F (0 to 50° C)
存儲溫度	– 4 to 158° F (–20 to 70° C)

1. Units of Measure Indicators show the user-selected units of measure.

2. Contact Indicator shows if contact or non-contact operation is selected.

3. Low Battery Indicator alerts the operator if the batteries are low.

4. On-Target Indicator confirms that the measurements are reliable.

5. Memory Indicators are illuminated when the maximum, minimum, average and last readings are recalled to the display for viewing.

訂貨清單

Gauge, contact adapter, cone tip adapter, 6" circumference universal surface speed wheel, reflective tape, NIST-traceable calibration certificate, operating instructions and foam-fitted, hardplastic carrying case.

轉速計，接觸式適配器，錐頭適配器，表速輪，反光帶，校準證書，操作說明書，泡沫墊，硬塑料儀表箱。

配件

DTCA Tachometer Cone Tip for CDT-200HD

CDT-TAPE 10 Strips of 1/2 x 4 inch reflective tape

CDT-WHEEL 0.1 m Circumference wheel for CDT-2000HD

DT6 6 Inch Circumference Tachometer wheel, 7mm shaft

DT12 12 Inch Circumference Tachometer wheel, 7mm shaft

DTSX Shaft Extension for Tachometers, 3 inch

DTFA Funnel Tip for Hand-held tachometers

LMA-3 12" Knurled Aluminum Measuring Wheel

205TS-4 Qty 4 Reflective Tab Sheet, 35 1/2" x 1/2" Squares

BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit