MeasuringRangeinSteel0

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：195

產品咨詢 13352927502

詳細介紹在線留言

Measuring Range in Steel

0.040 - 6.000 inches

1.00 - 150.0 mm

The CHECK-LINE TI-25P Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion from only one side!

The Checkline TI-25P holds a single ultrasonic velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work.

Standard configuration: In its standard configuration, the TI-25P is factory set to measure steel.

Optional configuration: When required the TI-25P can be programmed to measure any other single material instead of steel. In order to program the gauge for use on any other material then factory steel, a sample of the material to be measured is required or the exact sound velocity of the material must be known.

Resolution of 0.001 inch (0.01 mm)
The TI-25P probe is waterproof and can be submerged in water
Special-purpose probes are offered for a variety of applications
Switch-selected units for inches or mm
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
For underwater surveying, probe cable lengths up to 15 meter are optionally
Large, backlit LCD display retains last reading
Comes complete with cable and software to transfer the velocity to the gauge.
IP 65 Rated

Range in Steel	0.040-6.000" (1.00-150.0 mm) with supplied probe. Other probes available.
Resolution	0.01 millimeter (0.001 inch)
Display	4? - Digit, 0.5" Backlit LCD
Velocity Range	0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
Probe	1/4", 5 MHz, actual wearface is 5/8" (17mm)
Probe Wearface	PEEK (Polyethylethylkytone)
Cable	1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
Temp. Limits	Ambient: -30 to 50° C (-20 to 120° F) Material: -20 to 100° C (0 to 200° F) Special high temperature probes are optionally available
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	280 g (710 ounces)
Dimensions	64 x 114 x 32mm (2.5 x 4.5 x 1.25")
Accessories	Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Software	Comes complete with cable and software to transfer the velocity to the gauge.
Warranty	Gauge: 5 Years Probes: 90 Days

訂貨型號

The TI-25P is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

For setting the ultrasonic velocity, a connection cable and software are supplied

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer

BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

訂貨型號

TI-25P Programmable Ultrasonic Wall Thickness Gauge kit with T-102-2000 probe

相關型號

TI-25M-UWM

TI-25-UM-50