歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
PR5210已停產，新型號是PR5211，新舊款參數一致，可替代
PR5210數字變送器,即把模擬量變換成數字顯示,并按一定的比例輸出電流信號或電壓信號。MP26數字變送器的設計結合了過程容器中可靠稱重信息，操作簡單，設置方便，可與大部分應變式稱重傳感器連接使用，輸出4-20mA信號。
The PR5210 series of Digital Process Transmitters combine reliable and accurate weight acquisition with extremely easy operation and setup. Available versions:
Users can access directly all configuration and operation levels via the front serial interface. A Windows Engineering Tool allows convenient configuration from a Windows PC or Laptop. All instrument feature a built-in RS422/485 serial interface using the very simple and versatile SMA-Standard protocol.
Profibus-DP, 12 Mbit (PR 5210/00 + /11)
High-speed Profibus-Interface to connect to PLCs and SCADA systems. Provides weight values at maximum accuracy and speed. Smart Calibration Sartorius PR 5210
The easiest and fastest way to a reliable calibration even without weights due to high precision input amplifier and reference circuit.
Input signal filter
Powerful digital low pass filter to suppress unwanted signal variation caused by external disturbances. Variable cut-off frequency and selectable filter style.
Password protection
User definable pass code to prevent unauthorised access to parameters or calibration data.
Full Digital Signal Processing with up to 4.8 Mio Divisions Internal Resolution
全數字信號過程變送器，分辨率4.8 Mio Divisions
High Performance Sense Amplifier Circuit for Maximum Accuracy
高性能感應放大器電路，實現精度
SmartCalibration feature for fast calibration even without weights
智能快速校準，不需要砝碼
Direct calibration and configuration via Windows-PC
串口連接Windows-PC，直接校正和配置
W&M approval for 6000e, class III (EN 45501/OIML R76)
W&M認證6,000 e，精度等級Class III
Supply voltage 24 VDC
供電電壓：24VDC
Protection class IP 20, DIN-Rail mounting
防護等級IP20，導軌式安裝
Sensor input circuit and supply fully galvanically isolated from supply voltage ａnd all in- | output circuits. 傳感器供電 12 VDC, max. 160 mA ( = 75 O) 4- or 6-wire-circuit 輸入范圍 0 … 36 mV, internal Res.: 7.5 nV (appr. 4.8 Mio div.) usable stepwidth: 200 nV Linearity < 0.002 % (typ.) Dead load suppression 0 … 100 % 取樣間隔 10, 20, 40, 80,160 ms user selectable 精度 6000 e, Class III 0.5 μV/e @ 6 samples/sec LED狀態顯示 Status LEDs to signal operation ａnd error conditions. 輸入輸出 All I | O circuits fully galvanically isolated from sensor input and supply. Profibus-DP (PR 5210/00 + /11) 12 Mbit, DP-V0 IEC 61158 Type 3 and IEC 61784 模擬量輸出 (PR 5210/00 + /10) 0 | 4 … 20 mA, internal resolution 16 bit, usable stepwidth: 0.5 μA max. load 500 O user configurable | 數字 I | Os Function user configurable 3 + IN, 30 V, 10 mA 3 + OUT, 30 V, 30 mA 串行接口 RS232C via RJ-12 for configuration only RS422 | 485 via screw terminals Protocol: Remote Display Environmental conditions Operation: -10 … +55 °C Storage: -20 … +70 °C Humidity: 90 % RH, non-condensing Vibration acc. to DIN EN 680068-2-6 /Fc 供電 24 VDC, +10/-15 %, 8.2 W max. 合格證 EN 61000-6-2 and 61000-6-4 NAMUR, CE 防護等級 Housing | terminals IP20 Mounting on 35 mm DIN rail according DIN 46277 電子連接 Removable screw terminals for max. 2.5 mm2 System Phoenix | COMBICON 尺寸 99 + 116 + 45.2 mm 重量 Net 0.29 kg |
訂貨型號
PR 5210/00 Profibus-DP, Analogue Output, Digital I | O, Serial Interface 9405 152 10001
PR 5210/10 Analogue Output, Digital I | O, Serial Interface 9405 152 10101
PR 5210/11 Profibus-DP, Digital I | O, Serial Interface 9405 152 10111
相關型號
PR1590
PR1591
PR5230
PR5220
PR1710
PR1711
PR1590
PR1591
相關文章
當前位置：
上一個：
返回列表
產品分類