傳感器模擬器可模擬應變式稱重、測力、壓力、扭矩、加速度等各種傳感器的標準輸出信號，用來校準、檢驗相應的指示儀表，調試各種自動衡器和自動化系統

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：234

產品咨詢 13352927502

詳細介紹在線留言

傳感器模擬器可模擬應變式稱重、測力、壓力、扭矩、加速度等各種傳感器的標準輸出信號，用來校準、檢驗相應的指示儀表，調試各種自動衡器和自動化系統。

不僅如此，美國Rice Lake Transducer Simulator 4還可以測量供橋電壓、環境溫度，并去油可編程功能，是一款高性能、高準確度、多用途的應變傳感模擬器，內部分辨率已達到了100碼。

傳感器模擬器的主要功能是輸出一個標準的應變傳感器信號，用來檢查儀表在各種不同的測試條件下是否都能符合標準的要求。

An all-in-one carrying case provides the portability and convenience required by field technicians. The Transducer Simulator 4 is a fully functional simulator, for replicating a wide range of load cell scenarios.

Designed for high accuracy
Sealed lid with neoprene O-ring
Dustproof and crush tested to 500lb
Four operational modes including vernier adjustment, calibrated adjustment, 0.25mV/V offset and 0.50mV/V offset
Ideal for setpoint or batching simulation

Maximum Voltage:

15V

Bridge Type:

175 ohm star

Linearity:

Less than ±.02% full scale

Temperature Coefficient:

Absolute 5 ppm/°C; Tracking less than 0.5 ppm/°C

Variable Ranges:

Choose any fixed setting ±0.25mV/V or 0.50mV/V through a 10-turn wire-wound

potentiometer with locking clutch

Load Factors: